Shenzhen Yahee High Technologies Corp. Limited
Product Description
Long Lasting Sealing Strip: made of PVC material
Waterproof & Mildew Resistant: make your house more clean
Linear Design: w/crease in the middle and it can be curved 90 degrees
Easy to Install: simply unroll, peel back the backing paper and press into place
Practicable: for kitchen gas stove, bathtub bathroom sink & the gap between the wall
Can be cut to meet your various needs
Installation Instructions:
1. Use knife tool to remove the original sealing silicone completely;
2. Use organic solvent (thinner) such as rubber solution, petrol to remove the remainder on the surface;
3. Wait for the surface to dry completely;
4. It is better to control the temperature of the room at about 25℃ during installation. If it is too cold, you can use hair drier to heat the adhesive backing paper and then apply it;
5. Peel off the surface plastic film of the adhesive backing paper, curve it 90 degrees to apply it to the bathtub and the surface of the wall;
6. If you want to apply it to a 90 degree corner, it should be curved 90 degrees with the crease in the middle;
7. It can be used after 8 to 10 hours after having pressed hard.
Specifications:
Material: PVC
G.W.: 0.12 Kg/0.26 Lb
Width: Approx. 2.2 cm/0.9’’
Total Length: Approx. 3.2 m/126’’
Product Show
